Putting on boots can be a struggle, especially when there’s no handy zipper to help slide them on. If you’ve got a favorite pair of boots without zippers that you just can’t part with, don’t worry – you can still get them on easily.

With a few simple tricks and the right technique, zipper-free boots are a breeze to put on.

If you’re short on time, here’s a quick answer to your question: Loosen the laces as much as possible and loosen and widen the ankle opening to make more room for your foot to slide in. Point your toes and put your foot in at an angle, then slide your heel down into the boot.

Tighten laces starting at the bottom and working up for a snug fit.

Prepare the Boot

Loosen the Laces

Before attempting to put on boots without a zipper, it is essential to loosen the laces. Loosening the laces will create more room for your foot to slide in comfortably. Start by undoing the top few eyelets of the laces and then gradually work your way down.

By loosening the laces, you will be able to widen the ankle opening and make it easier to slide your foot into the boot.

Widen the Ankle Opening

If you are struggling to get your foot into a boot with no zipper, widening the ankle opening can make the process much easier. One way to widen the ankle opening is by using a boot stretcher. A boot stretcher is a handy tool that can expand the boot’s width and make it more accessible to slide your foot in.

Another method is to use a hairdryer to heat the material around the ankle opening. The heat will soften the material and allow it to stretch more easily. Remember to be cautious when using heat and test the temperature before applying it to the boot.

It’s important to note that not all boots are designed to have a wide ankle opening. Some boots, particularly those with a more fitted design, may not be suitable for widening the ankle opening. In such cases, it may be best to explore alternative options such as boots with zippers or slip-on boots.

For more information on boot care and tips, you can visit www.bootmoodfoot.com. They provide comprehensive guides on boot maintenance and offer valuable insights into finding the perfect pair of boots for any occasion.

Put Your Foot In

Putting on boots without a zipper can be a bit tricky, but with the right technique, it can be easily accomplished. Here are some step-by-step instructions to help you get your boots on without a zipper.

Point Your Toes

The first step is to point your toes downward, as if you were trying to touch the ground with them. This will help create more space for your foot to slide into the boot. If you have a shoehorn, you can use it to help guide your foot into the boot.

Insert at an Angle

Next, insert your foot into the boot at a slight angle. Start by placing your toes into the toe box of the boot and then gradually slide your foot in. By inserting your foot at an angle, you can take advantage of the natural shape of the boot, making it easier to get your foot in.

Slide Down the Heel

Once your foot is in the boot, gently slide your foot down the heel. This can be done by pressing your heel against the back of the boot and using your hands to guide your foot downward. Take your time and make sure your foot is properly positioned in the boot.

Remember, practice makes perfect. It may take a few tries to get the hang of putting on boots without a zipper, but with patience and persistence, you’ll be able to do it with ease.

Tighten the Laces

When it comes to getting boots on without a zipper, tightening the laces properly is key. Follow these steps to ensure a snug and secure fit:

Start at the Bottom

Begin by inserting your foot into the boot and positioning it properly. Next, grab the laces and start tightening from the bottom. Pull the laces through each set of eyelets, making sure they are evenly distributed and not twisted.

Work Upwards

Continue tightening the laces as you work your way up the boot. Use a crisscross pattern, pulling the laces snugly but not too tight. This will help distribute the tension evenly across the boot and prevent any discomfort.

Ensure Even Tightness

As you reach the top of the boot, make sure the laces are tightened evenly on both sides. Adjust the tension as needed to achieve a comfortable fit. Avoid overtightening, as this can restrict blood circulation and cause discomfort.

Remember, practice makes perfect! It may take a few tries to find the right balance of tightness and comfort. Don’t be afraid to experiment with different lacing techniques until you find what works best for you.

Use Boot Pulls

When faced with the challenge of getting boots on with no zipper, boot pulls can be a handy tool to rely on. Boot pulls are small, often decorative loops or straps that are attached to the back or sides of the boot. They provide leverage and grip, making it easier to slide your foot into the boot.

Attach Near Ankle

To use boot pulls effectively, attach them near the ankle area of your boot. This ensures that you have a firm grip and enough leverage to pull the boot on. Look for pre-existing loops or straps on your boots, or consider attaching your own pulls if they are not already included.

Grab and Pull

Once the boot pulls are in place, it’s time to slide your foot into the boot. With one hand holding onto the boot pull, use your other hand to guide your foot into the boot. The boot pulls provide a sturdy grip, allowing you to pull the boot on with less effort.

As you pull, wiggle your foot slightly to help it slide comfortably into the boot.

Remove Once On

Once your boot is on, you can remove the boot pulls. They are not meant to be worn while walking or during regular use of the boots. Simply unclip or slide the boot pulls off and store them in a safe place until you need them again.

Remember, boot pulls are designed to assist with getting your boots on, not to be worn as a fashion accessory.

For more information on different types of boot pulls and where to find them, websites like BootBarn.com and CountryOutfitter.com offer a variety of options to choose from.

Consider Alternatives

When it comes to getting boots on with no zipper, there are several alternatives to consider. These alternatives can help make the process of putting on your boots easier and more convenient. Let’s explore some of these options:

Boot Jack

A boot jack is a handy tool that can assist you in removing your boots, but did you know it can also help you put them on? Simply place the heel of your boot into the jack, and use it as leverage to slide your foot inside.

This can be especially helpful if you have a pair of boots that are tight or have a narrow opening. Boot jacks can be found in many shoe stores or online retailers and are a worthwhile investment for anyone who struggles with putting on their boots.

Zipper Inserts

If you’re determined to have a zipper on your boots, even if they didn’t come with one, zipper inserts are a great option. These inserts are designed to be attached to the sides of your boots, creating a zipper opening.

They are easy to install and can be found in various sizes to fit different boot styles. Zipper inserts not only make putting on your boots a breeze but also allow for easy removal at the end of the day. You can find zipper inserts at specialty shoe stores or online retailers.

Replace Laces

If your boots have laces instead of a zipper, replacing the laces with elastic ones can be a game-changer. Elastic laces provide flexibility and stretch, making it easier to slide your foot into the boot. They also allow for a more comfortable fit, as they adjust to the shape of your foot.

To replace the laces, simply remove the existing ones and thread the elastic laces through the eyelets. Tie them off securely, and you’re good to go. Elastic laces can be found in most shoe stores or online.

Remember, getting boots on with no zipper doesn’t have to be a struggle. By considering these alternatives, you can make the process easier and more enjoyable. Whether you choose to use a boot jack, zipper inserts, or replace the laces, finding a method that works for you will ensure that you can effortlessly slip into your favorite pair of boots.


Getting boots on without a zipper can be tricky, but with the right techniques you can slide them on easily every time. By loosening laces, widening the ankle, pointing your toes, and sliding your foot in at an angle, you can get your feet into all but the tightest non-zippered boots.

Tighten the laces gradually from bottom to top for the best fit. Boot pulls and shoe horns can also make things easier. With practice and patience, you’ll be zipping up those boots in no time – no zipper required!

Similar Posts